Ford Fusion Spacer Options
Ford 2.0L/2.3L Ecoboost Throttle Body Spacer:
Made from premium billet aluminum, Boomba Racing is excited to announce our Throttle Body Spacers for the '13-'18 Focus ST, '16-'18 Ford Focus RS & '13+ Fusion 2.0L!
This spacer adds volume to your intake plenum. This has been shown to aide in cylinder filling at lower RPM, smooth out throttle response, build boost sooner, and lengthen the effective wave pulse of the intake charge. In the picture shown above, you can see the dyno charts of this spacer paired with our intake manifold spacer and the gains are tremendous. Over 30 ft lbs of torque (in using both spacers) and a significant change in the horsepower curve.
1.5 Fusion Throttle Body Spacer:
Made from premium billet aluminum, Boomba Racing is excited to announce our Throttle Body Spacers for the 1.5 Fusion!
This spacer adds volume to your intake plenum. This has been shown to aide in cylinder filling at lower RPM, smooth out throttle response, build boost sooner, and lengthen the effective wave pulse of the intake charge.
The spacer also includes a 1/8" NPT port that can be used for a variety of purposes. It ships with a plug in the port for those not wanting to use it.
Fusion 1.6 Intake Manifold and Throttle Body Spacer Combo:
What you see is what you get:
This is for our Throttle Body Spacer AND Intake Manifold Spacer.
The best gains are seen when using these spacers together by helping to smooth the air entering your motor. The individual port matching helps the create better airflow to the air entering the engine.
Some of the benefits are listed below:
-Save $25.00 buying these as a combo
-All hardware is included (corrosion resistant)
Fusion 1.6 Throttle Body Spacer:
Made from premium billet aluminum, Boomba Racing is excited to announce our Throttle Body Spacers for the Fusion 1.6!
This spacer adds volume to your intake plenum. This has been shown to aide in cylinder filling at lower RPM, smooth out throttle response, build boost sooner, and lengthen the effective wave pulse of the intake charge. In the picture shown above, you can see the dyno charts of this spacer paired with our intake manifold spacer and the gains are tremendous. Over 17 ft lbs of torque on our Fiesta ST (in using both spacers) and a significant change in the horsepower curve.
Fusion 1.6 Intake Manifold Spacer:
Made from premium billet aluminum, Boomba Racing is excited to announce our Intake Manifold Spacers for the 1.6 Fusion!
This spacer adds volume to the air entering your head. This has been shown to aide in cylinder filling at lower RPM, smooth out throttle response, build boost sooner, and lengthen the effective wave pulse of the intake charge. In the picture shown above, you can see the dyno charts of this spacer paired with our throttle body spacer and the gains are tremendous. Over 17 ft lbs of torque on our Fiesta ST (in using both spacers) and a significant change in the horsepower curve.
The spacer also includes 8 threaded ports that can be used for aftermarket injection set-ups such as Aquamist. They come with plugs for those just wanting to use the spacer on its own.
Ford 2.0L/2.3L Ecoboost Throttle Body Spacer:
Made from premium billet aluminum, Boomba Racing is excited to announce our Throttle Body Spacers for the '13-'18 Focus ST, '16-'18 Ford Focus RS & '13+ Fusion 2.0L!
This spacer adds volume to your intake plenum. This has been shown to aide in cylinder filling at lower RPM, smooth out throttle response, build boost sooner, and lengthen the effective wave pulse of the intake charge. In the picture shown above, you can see the dyno charts of this spacer paired with our intake manifold spacer and the gains are tremendous. Over 30 ft lbs of torque (in using both spacers) and a significant change in the horsepower curve.
1.5 Fusion Throttle Body Spacer:
Made from premium billet aluminum, Boomba Racing is excited to announce our Throttle Body Spacers for the 1.5 Fusion!
This spacer adds volume to your intake plenum. This has been shown to aide in cylinder filling at lower RPM, smooth out throttle response, build boost sooner, and lengthen the effective wave pulse of the intake charge.
The spacer also includes a 1/8" NPT port that can be used for a variety of purposes. It ships with a plug in the port for those not wanting to use it.
Fusion 1.6 Intake Manifold and Throttle Body Spacer Combo:
What you see is what you get:
This is for our Throttle Body Spacer AND Intake Manifold Spacer.
The best gains are seen when using these spacers together by helping to smooth the air entering your motor. The individual port matching helps the create better airflow to the air entering the engine.
Some of the benefits are listed below:
-Save $25.00 buying these as a combo
-All hardware is included (corrosion resistant)
Fusion 1.6 Throttle Body Spacer:
Made from premium billet aluminum, Boomba Racing is excited to announce our Throttle Body Spacers for the Fusion 1.6!
This spacer adds volume to your intake plenum. This has been shown to aide in cylinder filling at lower RPM, smooth out throttle response, build boost sooner, and lengthen the effective wave pulse of the intake charge. In the picture shown above, you can see the dyno charts of this spacer paired with our intake manifold spacer and the gains are tremendous. Over 17 ft lbs of torque on our Fiesta ST (in using both spacers) and a significant change in the horsepower curve.
Fusion 1.6 Intake Manifold Spacer:
Made from premium billet aluminum, Boomba Racing is excited to announce our Intake Manifold Spacers for the 1.6 Fusion!
This spacer adds volume to the air entering your head. This has been shown to aide in cylinder filling at lower RPM, smooth out throttle response, build boost sooner, and lengthen the effective wave pulse of the intake charge. In the picture shown above, you can see the dyno charts of this spacer paired with our throttle body spacer and the gains are tremendous. Over 17 ft lbs of torque on our Fiesta ST (in using both spacers) and a significant change in the horsepower curve.
The spacer also includes 8 threaded ports that can be used for aftermarket injection set-ups such as Aquamist. They come with plugs for those just wanting to use the spacer on its own.
Ford 2.0L/2.3L Ecoboost Throttle Body Spacer:
Made from premium billet aluminum, Boomba Racing is excited to announce our Throttle Body Spacers for the '13-'18 Focus ST, '16-'18 Ford Focus RS & '13+ Fusion 2.0L!
This spacer adds volume to your intake plenum. This has been shown to aide in cylinder filling at lower RPM, smooth out throttle response, build boost sooner, and lengthen the effective wave pulse of the intake charge. In the picture shown above, you can see the dyno charts of this spacer paired with our intake manifold spacer and the gains are tremendous. Over 30 ft lbs of torque (in using both spacers) and a significant change in the horsepower curve.
1.5 Fusion Throttle Body Spacer:
Made from premium billet aluminum, Boomba Racing is excited to announce our Throttle Body Spacers for the 1.5 Fusion!
This spacer adds volume to your intake plenum. This has been shown to aide in cylinder filling at lower RPM, smooth out throttle response, build boost sooner, and lengthen the effective wave pulse of the intake charge.
The spacer also includes a 1/8" NPT port that can be used for a variety of purposes. It ships with a plug in the port for those not wanting to use it.
Fusion 1.6 Intake Manifold and Throttle Body Spacer Combo:
What you see is what you get:
This is for our Throttle Body Spacer AND Intake Manifold Spacer.
The best gains are seen when using these spacers together by helping to smooth the air entering your motor. The individual port matching helps the create better airflow to the air entering the engine.
Some of the benefits are listed below:
-Save $25.00 buying these as a combo
-All hardware is included (corrosion resistant)
Fusion 1.6 Throttle Body Spacer:
Made from premium billet aluminum, Boomba Racing is excited to announce our Throttle Body Spacers for the Fusion 1.6!
This spacer adds volume to your intake plenum. This has been shown to aide in cylinder filling at lower RPM, smooth out throttle response, build boost sooner, and lengthen the effective wave pulse of the intake charge. In the picture shown above, you can see the dyno charts of this spacer paired with our intake manifold spacer and the gains are tremendous. Over 17 ft lbs of torque on our Fiesta ST (in using both spacers) and a significant change in the horsepower curve.
Fusion 1.6 Intake Manifold Spacer:
Made from premium billet aluminum, Boomba Racing is excited to announce our Intake Manifold Spacers for the 1.6 Fusion!
This spacer adds volume to the air entering your head. This has been shown to aide in cylinder filling at lower RPM, smooth out throttle response, build boost sooner, and lengthen the effective wave pulse of the intake charge. In the picture shown above, you can see the dyno charts of this spacer paired with our throttle body spacer and the gains are tremendous. Over 17 ft lbs of torque on our Fiesta ST (in using both spacers) and a significant change in the horsepower curve.
The spacer also includes 8 threaded ports that can be used for aftermarket injection set-ups such as Aquamist. They come with plugs for those just wanting to use the spacer on its own.