It should be noted that Clutchmaster kits require the use of a Clutchmaster Flywheel. These must be purchased separate from the kit.

The FX100 System uses the Power Plus I Pressure Plate with the Steel Back organic disc. This clutch is engineered for heavy-duty street use. It is specifically designed for extended wear and additional clamping force for the enthusiast who has added an exhaust system, an intake system, up to 50hp NO2 upgrade, or other non-forced induction external bolt-ons. As with most Clutch Masters clutches, the FX100 incorporates the Hi-Leverage pressure plate design and the steel back disc. It features only slightly increased pedal pressure (over stock components), longer life than stock, and normal clutch feel during engagement and disengagement for a very smooth operation *Features* * High performance street system * Holding capacity 70% over stock * Heavy-Duty reinforced pressure plate * Hi-Leverage pressure ring design * Sprung hub/cushioned disc * Steel backed organic friction material *Includes* * Pressure Plate * Clutch Disc * Throw-out Bearing (when applicable) * Pilot Bearing or Bushing (when applicable) * Alignment Tool

The FX250 System uses the Power Plus I Pressure Plate and a hybrid combination of Clutch Masters New Formula Button on one side and a heavy-duty Steel Back Organic friction lining on the other. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced Kevlar without compromising the street friendly characteristics Clutch Masters is known for

The FX350 System uses the Power Plus I Pressure Plate with Clutch Masters New Formula Button disc. This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and have a spirited driving style. The FX350 clutch system has a higher holding capacity than a segmented Kevlar lining without compromising the street friendly characteristic Clutch Masters is known for. For year’s enthusiast have had to compromise durability for drivability and vise versa, however with Clutch Masters New Formula button we have closed the gap between these two tradeoffs.

The FX400 System uses the Power Plus I Pressure Plate with a Ceramic disc. This s the ultimate, extreme-duty street, or road/drag racing system. It is built using a special 4-wing Ceramic Button design disc for long life, outstanding holding capacity and high heat dissipation. SFI Approved for most race applications. *Warning:* The Ceramic disc engages very quickly and may chatter slightly upon starting from a stop. *Features* * Ultra heavy-duty street &racing system * Holding capacity 170% over stock * Heavy-Duty reinforced pressure plate * Hi-Leverage pressure ring design * Sprung hub/4-button * Ceramic friction material * SFI Approved on most race applications. *Includes* * Pressure Plate * Clutch Disc * Throw-out Bearing (when applicable) * Pilot Bearing or Bushing (when applicable) * Alignment Tool

The FX400 System uses the Power Plus I Pressure Plate with a Ceramic disc. This s the ultimate, extreme-duty street, or road/drag racing system. It is built using a special 4-wing Ceramic Button design disc for long life, outstanding holding capacity and high heat dissipation. SFI Approved for most race applications. *Warning:* The Ceramic disc engages very quickly and may chatter slightly upon starting from a stop. *Features* * Ultra heavy-duty street &racing system * Holding capacity 170% over stock * Heavy-Duty reinforced pressure plate * Hi-Leverage pressure ring design * Sprung hub/4-button * Ceramic friction material * SFI Approved on most race applications. *Includes* * Pressure Plate * Clutch Disc * Throw-out Bearing (when applicable) * Pilot Bearing or Bushing (when applicable) * Alignment Tool

Clutch Masters is proud to introduce the finest and most economical multi-plate clutch systems available for today’s high performance vehicles, the 725 Series. Clutch Masters Twin Disc systems are pure racing technology that also works well in high performance street applications that will be used on the street on rare occasions. They are designed to hold tremendous horsepower and torque ratings, while being reasonable to operate on the track. By increasing the clamping force of the pressure plate and adding to the square inches of usable disc area, CM Twin Discs significantly increase clamping values with an average of 50% increase in pedal pressure depending on the application. The cover assembly is machined from billet aluminum with 25% more tensile strength than the competition’s cast unit. The flywheel is machined from billet 6061-T6 aluminum to meet SFI spec 1.2 for competition in NHRA, NDRA, IDRC, IHRA, SCCA and NASA. Each aluminum flywheel includes a replaceable heat shield. Steel flywheels are also available on select applications. The 725 series is a smaller diameter assembly, which creates less rotating mass and offering quicker, and smoother shifting with much better throttle response, ideal for Drag racing applications. *Available Stages:* * “Street and Race” (TD7S) – 1 ceramic rigid disc, and 1 fiber tuff rigid disc * “Race” (TD7R) – 2 ceramic rigid discs *Clutch Masters Twin Disc features:* * Components can be purchased separately for economical repair. * Positive release for ease of high RPM staging and shifting. * Most have experienced better 4/10's times and averaged hundreds of passes without complications or repair *All systems include:* * Aluminum Cover Assembly with attached Diaphragm * Pressure Plate Ring * Two Discs * One Mid Plate * Billet Aluminum Flywheel (Steel available on select applications, call for price) * Release Bearing * Pilot Bearing (when applicable) * Pressure Plate Bolts